minerva® sink modules
Choose from steel, ceramic, or granite options – all factory prepared for a precise, elegant
finish. Multiple bowl configurations ensure your kitchen works exactly how you need it to.
minerva® sink modules are available as 3 metre boards as standard, with a selection of bowl options being available in 1.5 metres and Integrated 2.2 metres.
All minerva® sink modules are supplied as either left or right-hand bowl, which must be specified at the time of order. Images shown are left hand bowl. All bowls are suitable for use with waste disposal units and hot water taps.
KEY:
Will fit into 450mm base cabinet
Will fit into 500mm base cabinet
Will fit into 600mm base cabinet
Will fit into base cabinet openings over 650mm
Will fit into 450mm base cabinet
The notching of the cabinet may be required to fit this sink into the minimum base unit shown. Please note appliances in adjacent units may not allow unit to be notched, if in doubt please take expert advice.
Ceramic sinks (Crystal series)
Our ceramic sinks have been manufactured in our factory from the finest fireclay. Each sink is unique and. hand-finished in brilliant white lustre with a high gloss glaze.
- 12mm radius corners
- Installation may require additional support
- Available in both 3 metre and 1.5 metre board options
- FFC (Fine fireclay material) with glazed surface
- Boiling tap compatible
- Lifetime warranty on the sink bowls
Steel 10mm internal radius undermount sinks (Luca series)
For a more contemporary feel look no further than our 10mm radius steel undermounts. The tighter 10mm radius and pressed drainer channels give a clean modern feel and the simple drainer groove finish allows for the tap to be located to your own requirements.
- 10mm radius corners
- Plumbing kit supplied
- Boiling tap compatible
- Fitting clips & sealant supplied
- Available in both 3 metre and 1.5 metre board options
single bowl 
a. 340mm
b. 400mm
c. 190mm
super large bowl 
a. 410mm
b. 400mm
c. 190mm
Ultra large bowl 
a. 550mm
b. 400mm
c. 190mm
1.5 Duo bowl 
a. 340mm
b. 400mm
c. 190mm
d. 180mm
e. 400mm
f. 125mm
1.5 Designer bowl 
a. 550mm
b. 400mm
c. 190mm
d. 180mm
e. 400mm
f. 125mm
Granite undermount sinks (Enigma Series)
Our granite undermount selection offers great durability and a simple uncluttered design.
Add the choice of 4 colourways and the options are plentiful.
- 12mm radius corners
- Plumbing kit supplied
- Boiling tap compatible
- Fitting clips supplied
- Lifetime Warranty
- German SCHOCK Technology
- Available in both 3 metre and 1.5 metre board options
a. 400mm
b. 400mm
c. 200mm
a. 500mm
b. 400mm
c. 200mm
a. 335mm
b. 400mm
c. 200mm
d. 155mm
e. 400mm
f. 140mm
PVD Coloured waste kits available
Black
Copper
Gunmetal
Gold
Available in the following colours
Black
White
Gunmetal
Graphite
Champagne
Steel 25mm internal radius undermount sinks (Rhombus series)
Our original and still best-selling sink combination, radius 25mm corners and deep bowl combination in a prefabricated module, our inset bowl with draining board combination is prefabricated and ready to go.
- 25mm radius corners
- Plumbing kit supplied
- Boiling tap compatible
- Fitting clips & sealant supplied
Integrated sinks (Sensa series)
The ultimate sink module is here!
For the ultimate in luxury our integrated sink has sides formed from minerva surface material to give the perfect match. Paired with a steel bowl in a choice of four finishes you can make this the centrepiece of your new kitchen.
- Plumbing kit supplied
- Boiling tap compatible
- Fully fabricated at our factory
- Comes with matching coloured waste kits
a. 400 mm
b. 370 mm
c. 210 mm
a. 630 mm
b. 370 mm
c. 210 mm
a. 400 mm
b. 370 mm
c. 210 mm
d. 160mm
e. 370mm
f. 155mm
Available in the following colours
Copper
Gold/Brass
Gunmetal
Steel
All minerva® sink modules are supplied as either left or right hand bowl which must be specified at the time of order. Images shown are left hand bowl.
Both steel and acrylic bowls are suitable for use with waste disposal units. Only steel bowls are suitable for use with instant hot water taps.
Whilst minerva® sink modules are made from a solid piece of material, the recessed sections may have a slightly different pattern on some décors due to the spread of the coloured chips. Our acrylic bowls aren’t suitable for use with boiling water taps. Allowing boiling water to run freely into acrylic bowls over a period of time may result in superficial crazing of the acrylic surface. When straining boiling water from vegetables etc. we recommend you always run the cold water tap to help prolong the quality of the sink.
